(DRAFT)
- Check the firmware version on all M1000 Card Readers (insert procedure)
- Version options:
- 230C 5B - used for a CWT with a M1000 and A1000 (contactless reader)
- 230C 5M - for CWTs with M1000 only
- 200A 5H - is a Neops CAD and shouldn't be used in a CWT
- Version options:
- Check to see if the M1000 Communication Cable is plugged into the correct Com Port
- Com Port options (insert mainboard diagrams below):
- Com 3 is for most CWTs with M1000 that do NOT have Bill Acceptors (must be specified correctly in SD card configuration files - paste code example)
- Com 9 should be used for CWTs with Bill Acceptors (must be specified in SD card configuration files - paste code example)
- Com Port options (insert mainboard diagrams below):
0 Comments